Angtai New Materials

+86 13902893223

Products Textured Series Slate Veneer Stone Panels — Flexible, Li...

Slate Veneer Stone Panels — Flexible, Lightweight Slate-Look Cladding

This slate veneer stone panel is a soft-porcelain (flexible stone) sheet, not quarried slate: the color and cleft texture are reproduced with water-based, non-fired inorganic ink on a bendable stone substrate. That construction is what makes these flexible slate panels workable on curved walls, high-rise facades, and other jobs where real quarried slate is too heavy or too rigid to install. As thin slate veneer sheets go, this format ships flat, cuts on site with standard tools, and bonds directly to common substrates without adding structural load.

Size	1200×2400 \| 12003000 \| 12002900 \| 6001200 \| 6002400 \| 600*3000 mm
Thinckness	3.30-4.15 mm
Model	01WL601299

GET A QUOTE

Detail

Product Detail

Temperature tolerance	-40°C to 150°C
Wear resistance	Grade 4
Surface behavior	Rain-washable, easy-clean, low-maintenance

01WL601299 is the slate colorway currently in production. For other Slate series patterns, contact us to confirm available colors, sizes and finishes.

Learn more about the material and printing process at Soft Porcelain / MCM Material.

Key Advantages of Slate-Look Flexible Stone

Conforms to curves and irregular surfaces

within the specified bend radius, unlike a rigid slate slab.

Manufacturer-reported freeze-thaw tested

, holding up through repeated winter cycles without surface failure.

Installs by direct adhesive application

— installation requirements depend on substrate, building height, wind load, local code, and system design.

Rain-washable, easy-clean surface

reduces facade upkeep versus porous natural stone.

Where flexible stone panels fall short compared to natural stone — impact resistance, repair methods, and other honest trade-offs — is detailed at Flexible Stone Wall Panel Pros And Cons.

Where Slate Veneer Panels Are Used

Slate-look flexible slate panels go on interior feature walls, exterior facades, and hospitality, exhibition, and museum projects where a slate finish needs to read consistently across large or curved surfaces. Because thin slate veneer sheets carry so little dead load, they also work on high-rise elevations where full-thickness stone would exceed structural limits. Application-specific detail lives at Interior Stone Wall Panels and exterior stone wall panels. Buyers comparing formats before committing to slate can also review stone sheets, thin marble options, and thin stone options from the same flexible-stone line.

Installation & Substrates

These panels install by direct adhesive application — installation requirements depend on substrate, building height, wind load, local code, and system design. They bond to concrete, cement board, OSB, aluminum-plastic panel, calcium-silicon board, and plate metal, provided the substrate is level, clean, dry, and free of dust, oil, and loose material; a wall solid layer or interface agent goes on first over smooth surfaces to improve adhesion. The full step-by-step sequence — adhesive application, positioning, temporary fixing, edge trimming, and cleanup — is laid out in the Angtai Flexible Stone Installation Guide.

Diagram showing Angtai flexible stone installation layers held by a hand.

How to Order

The process runs: inquiry → custom solution → order confirmation → production (typically 25–30 days, depending on order volume) → shipment → after-sales support. Quote responses are typically issued within one business day after complete project details are received, and free samples are available once pricing is confirmed — the customer covers express shipping. Payment is accepted via T/T or L/C. Panel size, order quantity, and finish all move the final number; the specific factors that drive cost on flexible slate panels are broken down at Flexible Stone Price.

Request project pricing or a physical sample—with OEM/ODM requirements included where relevant. Quote responses are typically issued within one business day after all required details are received.

FAQ

What are slate veneers?

A slate veneer is a thin decorative surface built to look like natural slate without the weight of quarried stone. This version is soft-porcelain (flexible stone) with an inkjet-printed slate pattern on a bendable substrate — not cut natural slate.

What are the disadvantages of stone veneer?

Traditional thin-cut stone veneer can crack under flex or impact and still adds real weight to a wall. Flexible soft-porcelain avoids both failure modes by bending instead of cracking, though it trades some of the tactile "real stone" feel — the full comparison is at Flexible Stone Wall Panel Pros And Cons.

Is slate stone expensive?

Cost depends on panel size, order volume, and finish rather than a single catalog price. Angtai typically issues factory-direct quote responses within one business day after complete project details are received, with free samples available once pricing is confirmed (customer covers shipping).

Is stone veneer cheaper than stone?

Generally yes: a thinner, lighter panel may reduce structural-support requirements compared with full-depth stone and installs faster than full-thickness quarried stone, which typically lowers total installed cost — though the exact saving depends on the project. Ready to move forward? Contact Angtai for a factory-direct quote, sample, or OEM/ODM discussion on the slate veneer line.

Select Your Language